Sony PVM 1354Q Broadcast Monitor


Sony pvm-1354Q video Monitor



13" Trinitron high resolution color monitor features over 600 lines resolution.Knob type control volume, auto chroma/phase for easy setup, 16:9/4:3 switchable, menu driven CPU control with on screen display, ACC on/off switchable, component setup level (0,7.5 Betacam or SMPTE N-10), NTSC setup level (0 or 7.5), 100-240V AC (UL approved for 120V operation only), detachable AC power cord, EIA rack mountable, metal cabinet, tally lamp.




Features:


  • Adopts SMPTE C standard phosphors
  • Switchable aspect ratio (4:3 and 16:9)
  • Accepts Component (Y, R-Y, B-Y)/RGB signals
  • HRCRT assures a high resolution of 600 TVlines
  • Beam current feedback circuit for stability in the color balance
  • Auto chroma/phase setup
  • Optional component serial digital interface kits BKM-101C(video)/102 (audio) available
  • On-screen display for adjustment/operation
  • User preset function
  • Color temperature 6500K/9300K/User preset selectable (3200K to 10000K)
  • Underscan, Blue Only and H/V delay mode available
  • Accepts external sync
  • Caption vision decoder
  • Auto/manual degaussing
  • Mountable into a 19-inch EIA standard rack with the optional MB-502B
  • CRT type: HR Trinitron
  • Color temperature: 6500K, 9300K and user preset
  • Composite: 9MHz (-3dB) (Y signal with comb filter)
  • RGB: 10MHz (-3dB)
  • Audio power output: 0.8W, 81/2, monaural
  • Power requirements: AC 100V to 240V (UL approved for 120V operation),
  • Power consumption: 90W (with BKM-101C/102: 99W)
  • Horizontal: Less than 8% (typical)
  • Vertical: Less than 7% (typical)
  • PVM-1354Q: Diagonal 33.2cm (13 1/8")
  • Maximum brightness: 154cd/m2 (45fL)
  • Normal scan: 4 x 3 aspect ratio, blanked raster <+7%
  • Underscan: 4 x 3 aspect ratio, approx. -5% picture and blanking boundaries are displayed
  • Zone A: within 0.6mm (typical)
  • Zone B: within 0.8mm (typical)
  • Component (Y/R-Y/B-Y): 9MHz (-3dB) (Y signal)
  • Y/C input mode: 9MHz (-3dB) (Y signal)
  • Remote/Tally inputs: 20-pin connector for input selection, function control and tally control.
  • Demodulator axes: R-Y and B-Y (perpendicular to each other)
  • Vertical hold range: NTSC: 52 to 60Hz
  • PAL/SECAM: 42 to 50Hz
  • Horizontal hold: Horizontal oscillator locking range
  • AFC time constants: Set at 1ms
  • Operating temperature: 0 to 35øC
  • Storage temperature: -10 to 40
  • Humidity: 0 to 90% non-condensing
  • Altitude: 10,000ft(3050m)
  • Safety regulation: Complies with UL-1950
  • Electro magnetic compatibility: Complies with FCC rules part 15 class A digital device
  • X-ray radiation: Complies with DHHS rules 21 Subchapter J sec 1020 10